01 / MATERIAL

Earth
as
foundation.

Argibat sources its raw materials from local raw clays, extracted and processed in Wanlin, in the province of Namur. Each layer applied to your walls is the result of rigorous extraction and precise formulation — no unnecessary additives, no compromise on purity.

Inertie thermique

Régulation naturelle de la température

Hygrorégulation

Absorption et restitution de l'humidité

Isolation acoustique

Atténuation des nuisances sonores

Matière locale

Argile brute extraite en Belgique

02 / PRODUCTS

Four formulations.
One material.

ARG-001

Coloured clay smoothing plaster

EasyClay

Coloured clay smoothing plaster for gypsum board or fibro-gypsum panels. Smooth coloured surfaces with decorative effects. Free of volatile organic compounds.

Composition

Clay, sand, natural fibres, pigments, cellulose

Packaging

8 kg bucket · 24 kg bag

Coverage

1.4 kg/m² per mm thickness

Thickness

0.5 to 3 mm

Shelf life

24 months dry

COV

< 1 g/l — Classe A+

Domaine d'application

Smooth coloured surfaces on gypsum board or fibro-gypsum. Interior use only.

ARG-002

Raw clay finishing plaster

Argiline

Film finishing plaster in raw clay, sand, natural mineral pigments and cellulose. Applied in 1 or 2 coats on flat substrates. Natural humidity regulation.

Composition

Raw clay, sand, mineral pigments, cellulose

Packaging

8 kg bucket · 10 kg bucket

Coverage

approx. 1 kg/m²

Thickness

1 to 1.5 mm per coat

Coats

1 to 2 coats depending on substrate

Preparation

Allow to rest 1h30 after mixing

Domaine d'application

Film finish on flat surfaces, plaster previously primed with bonding primer.

ARG-003

White clay finishing plaster

Clay White
Finish

Smooth white finishing plaster based on dolomite flour, clay and hydrated lime. Applied in 2 coats over Argibase base coat.

Composition

Dolomite flour, clay, hydrated lime, cellulose

Packaging

25 kg bag

Coverage

23 m² per bag at 1 mm

Thickness

0.5 to 2 mm per coat

Coats

2 coats recommended

Shelf life

24 months dry

Domaine d'application

Applied over Argibase plaster in 2 coats. Clean water, 10 l per bag.

ARG-004

Raw clay base coat plaster

Argibase

Base coat plaster made from Wanlin raw clay, sand and cellulose fibres. Prepares any substrate for Argiline or EasyClay. New construction or renovation.

Composition

Wanlin raw clay, sand, cellulose fibres

Packaging

25 kg bag · Big-bag 1,000 kg

Granulometry

0/2 mm

Density

1.35 kg/l dry · 1.60 kg/l after application

Thickness

0.5 to 2 cm

Fire resistance

M0 — Non-combustible

Domaine d'application

Any sound substrate, new construction or renovation. Manual or spray application.

Raw clay,
in its purest form.

Earth
as
foundation.